VER 1.8 11/14/18 11
Place your first assembled main support beam infront of
your posts and measure down 11,” mark this measurement. This
will be where the bottom of the beam sits. Evenly space the
over hang of the beam on each side to aproximatley 6” each
end. Screw securely into place. Repeat for second beam on
opposite side using x16 - 4” scews. Apply 4 small amounts of
glue to the inside post cap corners, slide over post securly, hold
for 30 sec. Repeat for second cap.
Step 5
ATTACHING MAIN SUPPORT BEAM & POST CAP
1
1
2
3
2
3
Apply a bead of glue around
post, 1” below the beam. Slide
the post trim up tight to the
the beam and hold for 30
seconds.
4” - X16