12
12 x 12 Flat Top louvered Pergola
Rafter Assembly
Insert one of the notched 2x6x12 pressure treated wood into a beam
section follow by the joiner and another beam section. Make sure the
notch is at the bottom as shown.
Glue and attach the Decorative End Caps onto the ends as shown.
Using four 1 1/2” screws provided, fasten the Rafter Joiners,
Rafters, and Wood together as shown.
Repeat for all six rafters.
2
3
4
5
www.newenglandarbors.com
3
4
Note:
Ensure the wood insert is not
protruding into the notched
area of the Rafter.
