11
12 x 12 Flat Top louvered Pergola
Main Support Beam Assembly
Using four 1 1/2” screws provided, fasten the Beam Joiners,
Main Support Beam, and Wood together as shown.
Now that the wood is secured in place, use the predrilled holes
as templates and drill 1/2” holes through the wood as shown.
Make sure to drill straight through to the other side of the main
support beam.
Repeat for all four main support beams.
3
4
5
www.newenglandarbors.com
3
4
Rafter Assembly
1
S T E P F I V E
To accomodate the notches on the rafters, first the wood inserts
must be notched out as shown below:
Six will be needed.
7 in (min)
3½ in
144 in
3½ in
7 in (min)
