New England Arbors Bloomsbury Assembly Instructions Download

Page: 4 / 4

The Bloomsbury Raised Planter Box

STEP T W O ( C O N T ’ D )

Place the four floor panels onto the floor supports as shown.

Note the notches on the one side of the end panels. The notches

are to wrap around the posts.

Pressure fit the Post Caps into place. Push firmly until they snap

into

place.

NOTE: If you purchased the Bloomsbury Trellis, leave 2 Post Caps

off one of the 36" (91 cm) sides to allow the trellis to be mounted.

Notch

www.newenglandarbors.

com

www.newenglandarbors.co.uk

North America

Toll Free Phone: 1 800 282 9346

United Kingdom Tel:

(44) 2038 687160

Summary of Contents for Bloomsbury

Page 2: ...e side of the shelf rails will bottom out on the post This is designed to accomodate the attachment of the extension kit sold separately Align and insert the second Pre Assembled Side Wall Panel as shown Stand the planter box up and fasten the shelf rails to the posts using 8 of the screws provided through the pre drilled holes as shown 1 The Bloomsbury Raised Planter Box 1 2 3 ...

Page 3: ...the 4 upper corner brackets as shown Fasten the bottom corner of the wall panels together using 16 of the screws provided into the 8 corner brackets as shown 4 STEP TWO 4 5 The Bloomsbury Raised Planter Box Insert the floor support rail into the front and rear walls as shown Note the notch at the ends of the floor support rail 6 ...

Page 4: ...re to wrap around the posts Pressure fit the Post Caps into place Push firmly until they snap into place NOTE If you purchased the Bloomsbury Trellis leave 2 Post Caps off one of the 36 91 cm sides to allow the trellis to be mounted 7 8 7 Notch Notch www newenglandarbors com www newenglandarbors co uk North America Toll Free Phone 1 800 282 9346 United Kingdom Tel 44 2038 687160 ...