Page 6
4.
Press handle steam button 2, User can adjust steam volume according to different objects.
● Press ON/OFF switch, steam mop will automatically be set to DUST setting, DUST indicator light will be
bright, DUST setting is light steam for a quick dusting and best dry time.
● Press steam button one time to enter MOP mode, MOP and DUST indicator lights will be bright at the
same time; MOP setting is for normal, everyday steam cleaning.
● Press steam button two times to enter SCRUB mode; all MOP, DUST, SCRUB indicator lights will be
bright; SCRUB setting is for heavy cleaning and will leave floors damp.
● Press steam button three times to enter neutral mode; MOP, DUST, SCRUB indicator lights will not be
bright, product will stop working. Use neutral mode if you are not proceeding with functional operation
within 6 minutes. The product will be switched into standby mode automatically. (main body indicator light
will flash).
Notice:
In order to reduce the power consumption of the battery, the handle on/off switch 3 on the handle
A, light will be put out automatically if you don’t operate within 6 minutes. Press any key on the handle A,
to wake up indicator light.
Notice:
When using the product to clean the floor, Press steam button 2 and on/off switch 3 on the handle
A. Handle steam gear indicator light 6 and main body steam gear indicator light will be bright at the same
time. If you press main body on/off switch 12 and main body steam button, the indicator light on the han
-
dle will not be bright at the same time. Press key again on the handle A, to go back to normal.
5.
Clean your floors with a forward and backward motion. When you are done, press the ON/OFF
SETTING button until the red light is flashing as in standby mode.
6.
When switching the appliance on, the red indicator lights will flash, it indicates preheating. If the lights
do not illuminate, please check the "troubleshooting" section for more details.
NOTICE: If there is a power failure in the middle of the warm-up or power-off after the warm-up
is complete, turn the power supply on again, according to the interval of the power is turned on
again (after 4 minutes), the product may repeat the above warm-up operation.
7.
When cleaning normally, the steam head has big rotary angle, can clean corners and also can
clean low spaces.
(Fig.10)
OPERATION
1.
Filling the water tank
● Turn the water tank cap counter clockwise and remove from
the tank.
(Fig.7)
● Use the filling flask and pour water into the tank. Do not
overfill. Replace the cap on the water tank
(Fig.8)
2.
Plug in the appliance to a grounded outlet.
3.
Main body indicator light will be flashing, Press handle on/
off switch 3, main body indicator light will glow red, steam
gear indicator light 6 on the handle and main body steam gear
indicator light 10 will be bright. After 25 seconds, main body
indicator light will change to blue. Steam will be released
(Fig.9)