1. Make sure the battery has been
installed correctly.
2. If you are using it for the first
time, please connect the keypad to
the power adapter.
3. Turn on the power switch under
the battery cover.
ON
Preparation before Use
Power ON
13
Pair the Keypad with the Main Box
Scan QR Code
Learn Mode
(Model Pro L9)
1. Reset the keypad until the status bar is flashing in 3 colors.
2. Launch the App, In the accessory management
section, tap [Add Accessory]
2. Launch the App (For networking alarm system)
or PC client (For GSM alarm system only) to enter
the Learn Mode
3. Scan the QR Code on the back of the keypad.
3. Press 1234 + Arm to send signal to the system.
4. Follow the guideline in App and save the
settings.
4. Follow the guideline in App/PC client and save
the settings.
The keypad will beep once when the pairing process is finished.
Pair the RFID Tag with the Main Box
Scan QR Code
Learn Mode
1. Make sure the keypad has been paired with the system.
2. Launch the App, In the accessory management
section, tap [Add Accessory]
2. Launch the App (For networking alarm system)
or PC client (For GSM alarm system only) to enter
the Learn Mode
3. Scan the QR Code on the back of the keypad.
3. Read the RFID tag by waving it closing to the
button area until hearing a beep sound.
4. Follow the guideline in App and save the
settings.
4. Follow the guideline in App/PC client and save
the settings.
You can try disarming the system by reading the RFID tag via keypad after pairing, to check if the tag has
been correctly paired.
14
