-
９
-
(2) How to embed on a panel
①
Cut out a rectangular opening in the panel as shown in Fig. 7.
②
Insert the equipment into the opening from front.
Attach the backplate on back of the equipment using the attaching screws as shown in Fig. 8. Then, fasten it
to the panel with fixing screws. The equipment can be attached to a 1.6 to 6 mm thick panel.
Fig. 7 Dimensions to Cut a Panel
Fig.8 Embedding on a Panel
Leave a 30 cm space under the equipment’s body for maintenance work. If the equipment has a backup
power source, also leave a 30 cm space on the right side of the equipment for changing batteries.
MEMO
110
200
Attaching screw
Equipment
Equipment
Without a backup power source
With a backup power source
Backplate
Panel
Panel
Backplate
Attaching screw
Fixing screw
Fixing screw
