NEW BRUNSWICK SCIENTIFIC Innova 4300, Manual To Operations, Page: 40 / 61

28
INNOVA 4300
•
M1193-0050 User’s Guide
Figure 10: Recorder Connector
NOTE:
The figure above is the pin-out diagram, as seen from the rear of the
unit. The chart below identifies the pin application and scale.
Pin No. Signal Name Scale
6 Speed 1V = 100 rpm
2 Ground
7 Temperature 1V = 20° C
3 Ground
5.9 ESD Precautions
1. Do not remove components from their antistatic packaging until you are ready to
insert them into their sockets or install the board.
2. Before handling components or boards, touch an unpainted portion of the system
unit chassis for a few seconds.
3. Wear a wrist grounding strap, available from most electronic component stores.
WARNING!
Do not attempt to change boards or electronic components
unless you are a qualified Service Engineer or Technician.
Integrated circuits are extremely susceptible to damage from
electrostatic discharge. The Service Engineer or Technician
should read and follow the ESD Precautions below before
undertaking any work.