NEW BRUNSWICK SCIENTIFIC Innova 2000, User Manual

Page: 32 / 55

32
M1190-0050 Innova 2000/2050 User’s Guide
To measure ambient temperature:
1. With the probe housed in its holder, press the
SELECT
key until the
° C
indicator
illuminates.
2. Ambient temperature will be displayed.
To measure temperature within a vessel:
1. Remove the probe from its holder and insert it into the vessel to be monitored.
2. Use the
SELECT
key to indicate
° C
.
Since the Temperature Monitor option does not provide temperature control, any
attempt to enter a temperature setpoint results in
Err
(“Error”) being displayed.
5.8 Cleaning & Maintenance
The unit may be cleaned using a damp cloth or any standard, household or laboratory
cleaner to wipe down its outer surfaces. Do not use abrasive or corrosive compounds
to clean this instrument, as they may damage the unit and void the warranty.
The Innova 2000/2050 requires no routine maintenance by the user. The
MAINT
indicator light goes on at the end of 10,000 hours of use. At that time contact your
local NBS Service Engineer or call the NBS Service Department. This periodic
maintenance will keep your unit in premium condition.