NEW BRUNSWICK SCIENTIFIC C2 Classic, Manual To Operations

Page: 24 / 41

24
6.4 Timed Functions
The shaker may be programmed to automatically stop after a preset time period of 0.1
hour - 99.9 hours. There must be power to the shaker in order to set the timer.
However, a timed run can be initiated while the unit is either shaking or stopped.
To set the timer:
1. Press the
SELECT KEY
until the
HRS INDICATOR
is illuminated.
2. Press either
V
or W
KEY
to enter the
SET MODE
and set between 0.1 - 99.9 hours.
3. While the
SET INDICATOR
is illuminated, press the
START/STOP KEY
to program the
time (and start the run). The
TIME INDICATOR
will light and remain on for the
duration of the run. At the end of the timed run the display will read
OFF
, and the
TIME INDICATOR
will flash.
To disable the alarm (flashing
TIME INDICATOR
), press the
SELECT KEY
and change to
any other function.
To cancel the timer without stopping the shaker:
Repeat steps 1 and 2, then immediately press the
START/STOP KEY
. The
TIME
INDICATOR
will cease to flash and the display will read
OFF
.
6.5 Alarm Functions
The shaker has a visible alarm that is activated at the end of a timed run, or if the speed is
5 RPM or more from the setpoint.
6.6 Total Running Time
The control modules of the C2 Shaker totalize the time the shaker has been “
ON
” to track
hours of usage. To display the accumulated running time:
1. Press
SELECT
until the
HRS INDICATOR
is illuminated.
2. Simultaneously press the
V
and
W
KEYS
.
The
SET
and
MAINT INDICATORS
will flash and the accumulated running time will be
displayed in hundreds of hours (i.e., “02” equals 200 hours; “102” equals 10,200 hours).
This display will continue for 10 seconds and then default to the previous mode readout.
M1244-0051
Y
C2 Classic Platform Shaker User’s Guide