Nevir NVR-7400-32HD-N, Instruction Manual

Page: 42 / 50

Getting Started
English - 20 -
NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables
to enable connection. See the illustrations above. | You can use YPbPr to VGA cable (not supplied) to enable YPbPr
signal via VGA input. |You cannot use VGA and YPbPr at the same time. | To enable PC audio, you will need to use the
SIDE AV CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode,
output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend that you plug
all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is
SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio
YPbPr or PC Connection Cable
(Not supplied)
HDMI
Connection
(back)
SPDIF
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
(Not supplied)
HEADPHONE
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Connections
02_MB82_BASIC_[GB]_1900UK_PVR_DVBT-C_NICKEL22_32189LED_BMS_10086716_50257847.indd 20 02_MB82_BASIC_[GB]_1900UK_PVR_DVBT-C_NICKEL22_32189LED_BMS_10086716_50257847.indd 20 16.08.2013 15:02:29 16.08.2013 15:02:29