Default Setting
The item Default Setting appears
only when the machine was not used.
To activate the adjustment, you have
to restart the machine.
A. TV Type
This DVD Player supports a variety
of TV standards, such as MULTI
(AUTO), NTSC and PAL.
If your TV only supports NTSC or
PAL standard, the TV screen will
blink with black and white spots
when a wrong standard is selected.
In this case, you should press Set
and go to the interface of default
setting, where you could find the
proper standard to play the contents.
Note: To set the TV standards:
1. You can choose from the two
options, NTSC and PAL, from the
DVD Player;
2. Refer to the table below, which
shows the TV standard matched
by the respective disk:
Disk
Output Format
Type Format TV Standard
NTSC PAL
DVD NTSC NTSC PAL NTSC
PAL
-------- PAL
PAL
B. Audio
You can choose the item Audio in
the preference interface to set the
audio output of the DVD contents.
C. Subtitle
Set the preferred language as the
default value of the DVD Player’s
subtitle. (Subject to compatibility
of DVD Player)
D. Disc Menu
Set the preferred language as the
default value of the main interface
of the DVD Player. (Subject to
compatibility of DVD Player)
13
Summary of Contents for NVR-695DCDU
Page 47: ......
