Nevco MPCX2 Football Operator Instructions Manual Download Page 25

21 

 

Setting the Control for Your Model of Scoreboard 

This procedure is not necessary if you have one of the following models: 

1500, 1510, 1530, 1535, 1550, 1600, 1610, 1630, 1635, 1650, 1000, 1010, 1030, 1035, 3500, 
3502, 3504, 3514, 3515, 3516, 3520, 3525, 3534,  3550, 1632, 9605, 9505, 9715, 9515, 3400, 
3402, 3404, 3414, 3415, 3416, 3425, 3434, 9405, 9550, SCD-5, SCD-7, S60-LED, S60, SCD-4. 
And for any sport except Soccer: 2700, 2710, 2715, 2740, 2750, 2760, 2770, 2775, 2600, 2610, 
2615, 2640, 2650, 2670, 2675, 2500-D, 2500, 2500-A4-D, 2500-A4, 2540, 2540-A4, 2550-D, 
2550, 2560, 200, 230, 9510, 9715, 9515, 9710, 2400, 2400-A4, 2440, 2440-A4, 2450, 2460, 
9410 

Step 1.

 

Turn the control on by pressing 

 

Step 2.

 

Press the                 button until the display reads 

 

Step 3.

 

Enter the “Code” with the buttons in the sequence 

a.

 

Segment timer - (Segment time) (+) (-) (Auto Horn) 

b.

 

Shot Clock/Pitch Time/Delay Of Game - (Reset 1) (+) (-) (Reset 2) 

 

Step 4.

 

Continue pressing the                  button until the display reads 

Step 5.

 

Press the                 key to select the scoreboard model shown in the table below. 

Step 6.

 

Press the               key to exit the menu. 

 

Multiple Receivers and Controllers 

 

 Both multiple controllers and receivers can be on the same network.  

Multiple Controllers 

For example, one person with a controller can control Game Time and another person with a separate 
controller can control Game Score of the same game on the same scoreboard. Multiple controllers can 
be used for any combination of game data.  

If a second controller is powered on after the first powered on controller has been initialized, then the 
second controller will be configured with the same Scoreboard Model described in the “Setting the 
Control for Your Model of Scoreboard” section.  

Multiple Receivers 

Multiple receivers can be used on the same network. One example could be separate scoreboards for 
the same game or in the case of basketball one receiver controls the scoreboard while other receiver(s) 
control the shot clock(s).  

 

 

Scoreboard Model 

  (+) 

Enter Code to 

Change Settings 

ON/

OFF 

Options 

  HOME 

 

 GUESTS 

 

 + 

 

 

 - 

 

 

Options 

Options 

Summary of Contents for MPCX2 Football































Reviews: