Nevadent 324436, Operating Instructions Manual

Page: 12 / 84

NZR 1.5 B3 GB
│
IE
│
NI
│
CY
│ 9 ■
5) Once the interdental space appears to be cleaned, slide
the slider switch
5
to position 0 . The appliance stops .
6) Pull the cleaning attachment
2
out of the interdental space
and continue cleaning with the next interdental space .
NOTE
► Divide your jaw into 4 quadrants . Once you have
cleaned all the interdental spaces in one quadrant, rinse
the cleaning attachment
2
under running water .
7) After completing the cleaning session, rinse the cleaning
attachment
2
thoroughly under running water . Hold the
appliance so that the cleaning attachment
2
is pointing
downwards and the water flows over the cleaning attach-
ment
2
.
If you want to remove and dispose of the cleaning attachment
2
:
1) Remove the appliance head
1
by turning it a little so that
point on the appliance head
1
is aligned with the
symbol on the hand set
4
. You can then remove the
appliance head
1
.
2) Pull the cleaning attachment
2
off the attachment fitting
3
.
If it is attached too firmly, use the removal tool on the storage
box
8
.
3) To do this, push the cleaning attachment
2
all the way
through the opening in the storage box
8
and move the
hand set
4
together with the appliance head
1
in the
direction of the arrow:
This will remove the cleaning attachment
2
from the
attachment fitting
3
and it will fall off .