7
User Manual – Gigabit PoE Supply NPS-30W | BDA 579 V2 2020/06
Safety
2.3.1 Declaration of conformity
The device meets all the relevant EU directives and therefore has the CE and EAC marking. The
Declaration of Conformity may be viewed at https://www.neutrik.com/en/support/downloads.
2.4 Important safety instructions
Avoid property damage to the Gigabit PoE Supply due to unsuitable operating and environmental
conditions:
•
Never immerse in water.
•
Protect from strong sunlight.
•
Never install the device near heat sources such as radiators, heating units, ovens or stoves.
•
To avoid overheating, never cover the device.
•
Protect the device from impact and above all, from falling from poles, stages, tables or furniture.
Repair
w
NOTE
Property damage due to improper repair!
The Gigabit PoE Supply does not contain any parts that you can repair yourself. Opening or re-
pairing the device on your own may result in severe damage to the device.
T
Do not open the housing of the Gigabit PoE Supply under any circumstances.
T
Do not change any parts yourself.
T
Only have the Gigabit PoE Supply repaired by a authorized specialist dealer.
Information for operation
T
Ensure that the ambient conditions specified for the Gigabit PoE Supply is observed during
operation.
T
Do not use the Gigabit PoE Supply if it is not functioning properly, has fallen or been damaged,
has become wet or if parts of it have been immersed in water.
T
If disruptions occur during operation:
Immediately disconnect the Gigabit PoE Supply from main.
T
Do not operate the Gigabit PoE Supply in environments where flammable or explosive materials,
gases or vapors are present or might occur.
2.5 Intended use
The Gigabit PoE Supply is a Gigabit power supply used to supply power and transmit data over
Ethernet
2.6 Foreseeable improper use
The Gigabit PoE Supply is not suitable for use outdoors and in potentially explosive atmospheres.