Neutral X-DREi, Owner'S Manual

Page: 11 / 20

X-
DREI
<10>
Finally there is another possible connection
mode, the Loop Tape. If your preamp has
an input / output recording tape, you can
connect the X-DREI here as indicated in the
instruction manual of your preamp, as if it
were a recording system, processor or
equalizer.
Front
As you can see the design of the X-DREI is extremely simple, as befits a device of its range
where ease of use and high sound quality should dominate.
While "off" the bypass redirects each input to its output (RCA-RCA and Balanced-Balanced).
There is no change in the connected equipment's impedance values when in bypass.
Switching on the equipment
If you've already got to here, you must have the equipment fully installed, tested and
connected.
It is common sense to avoid damage to your speakers by turning the amplifier stage on last,
and also switching them off first!
When you press the power button located on the rear panel, the blue LED will light dimly.
After a while, when all the internal modules are stabilized, the LED will light up brightly,
indicating that it is fully operational.