Connecting Elmyra
Elmyra comes with a USB power cord that has a USB A connector on one
end and a 5.5 x 2.1 mm DC barrel plug on the other end (ring is
negative, tip is positive). It operates on 5 V of DC voltage and can
conveniently be powered by any mobile phone charger, USB hub, laptop
or even by a USB power bank on the go.
The audio output uses a standard 6.3 mm (¼ inch) mono (TS) jack. Plug
it straight into your mixer, audio interface, effects unit or powered
speakers.
CAUTION!
Plugging headphones directly into the audio output is not
recommended as they present a much lower input impedance which the
circuit is not made for. Plainly speaking, in the best case the sound
will be very quiet and in the worst case you might damage your Elmyra.
Signal Flow
