![Neurosoft Neuro-MMG Technical Manual Download Page 17](http://html1.mh-extra.com/html/neurosoft/neuro-mmg/neuro-mmg_technical-manual_1676378017.webp)
Proper Use
17
If you use Neuro-MEP.NET software, start it and select “Tremor” test. In the appeared
window set up the required parameters. The detailed information on how to perform
the acquisition is stated in Neuro-MEP.NET user manual.
Fig. 9. Selecting “MMG test”.
Use the sensor connected in accordance with Fig 5.
3.3. Test Completion
Upon the test completion remove the MMG sensors from the patient and disconnect
them from MMG unit. Disinfect the sensors as stated in section 4.3 “Disinfection”.