Container Cleaning System TANKO®EX-R64T
38/80
Translation - Operating/installation instructions 2020/03
4 Transport and Storage
4.2
Transport
NOTE ON EXPLOSION PROTECTION
Transport damage can result in the loss of the explosion protection.
In the event of signs of transport damage, do NOT put the device into operation!
Contact the manufacturer of the device.
NOTE
Improper transport can result in damage to the device.
The functional safety and reliability of the device may be impaired.
Observe the symbols and instructions on the packaging.
Always transport the device in dry condition.
Protect the device from impact.
If possible, use the original packaging for transport.
Proceed with care when unloading the device and when transporting it on your premises.
Do not remove the packaging until shortly before installation.
4.3
Storage
NOTE ON EXPLOSION PROTECTION
Incorrect storage can result in the loss of the explosion protection.
In the event of signs of storage damage, do NOT operate the device!
Contact the manufacturer of the device.
The packaging of the device and the components is designed for a storage period of 3 months.
NOTE
Risk of damage to the device as a result of incorrect storage!
Incorrect storage can cause damage to the device and its components and result in premature aging
(e.g. plastic parts).
The failure of components or a device malfunction can cause material damage and consequential damage.
Adhere to the following storage conditions:
–
Store the device in the original packaging wherever possible.
–
Store the device in a clean and dry place (e.g. closed, dust-free room).
–
Store the device in steady environmental conditions.
–
Avoid major temperature fluctuations in order that condensation does not develop.
–
Prevent dirt and moisture from entering the device.
–
Protect the device from weathering influences (e.g. development of condensation in the device,
sunlight).
–
Protect unpacked devices or components with dust-tight covers. Condensation must not be
allowed to develop beneath the cover.
Parameters for Storage (Recommended):
–
Room temperature
+10 °C – +55 °C (+50 °F – +131 °F)
–
Relative humidity
max. 60% (non-condensing)
