Neumann KM D AES 42 Brochure Download Page 6

6

Capsule Extensions for Miniature Microphone System KM D

Any KVG ... capsule extension allows to use the KK 1... capsules
separated from the output stage without the need for additional
cables. The rigid part of the capsule extension is 8 mm in diameter.

At the capsule end, the swivel can be set through ± 110°. The
KVG ... are mounted with MZGE 8000 or 8002 on MZEF ... vertical
bars. Special lengths on request.

Further Accessories for KM Miniature Microphone

Capsule Extension KVG 1120 nx

The extended length of the KVG 1120 nx
is approximately 1200 mm.

KVG 1120 nx ....... nx ......... Cat. No. 008610

Capsule Extension KVG 130 nx

The extended length of the KVG 130 nx
is approximately 300 mm.

KVG 130 nx ......... nx ......... Cat. No. 008608

Capsule Extension KVG 160 nx

The extended length of the KVG 160 nx
is approximately 600 mm.

KVG 160 nx ......... nx ......... Cat. No. 008609

Sound Diffraction Sphere SBK 130 A

The SBK 130 A sound diffraction sphere
slips onto the KM 130, KM 131 (D) and
KM 183 (D) pressure microphones.
While sounds coming from the front-half
space are emphasized by up to 2.5 dB
between 2 kHz and 10 kHz, sounds arriv-
ing from the rear-half space are attenuat-
ed by 2.5 dB max in the range above
5 kHz. Inner Ø 22 mm.

SBK 130 A, 22 mm blk ..... Cat. No. 008612

Output Stage KM D (nx)

The KM D (nx) microphone output stage
is part of the modular KM D miniature
microphone system. Together with a
KK 1.. capsule head it constitutes a com-
plete microphone of the KM D system.
Preset frequencies 44.1, 48 and 96 kHz,
other frequencies on demand.
Ø 22 mm, length 93 mm.

KM D (44.1 kHz) ....... ni ..... Cat. No. 008578
KM D nx (44.1 kHz) .. nx .... Cat. No. 008581
KM D (48 kHz) ...........  ni .... Cat. No. 008579
KM D nx (48 kHz) ...... nx .... Cat. No. 008582
KM D (96 kHz) ........... ni ..... Cat. No. 008580
KM D nx (96 kHz) ...... nx .... Cat. No. 008583

Summary of Contents for KM D AES 42









Reviews: