Neumann KM D AES 42 Brochure Download Page 5

5

Foam Windscreens

Windscreen WNS 100

Windscreen for KM miniature micro-
phones. Wind noise attenuation 18 dB.
Attenuation at 15 kHz 2 dB. Ø 45 mm.

WNS 100 ............. black ...... Cat. No. 007323
WNS 100 ............. red ......... Cat. No. 007324
WNS 100 ............. green ..... Cat. No. 007325
WNS 100 ............. yellow ... Cat. No. 007326
WNS 100 ............. blue ....... Cat. No. 007327
WNS 100 ............. white ...... Cat. No. 007328

Close range sounds, wind, and fast movements of the microphone
boom, all may cause interfering noises. To avoid these unwanted
sounds, windscreen accessories are available. Typically, they are
made out of open-cell polyurethane foam. These windscreens do
not cause interfering resonances and do not influence the direc-

Windscreen WNS 110

Acoustically transparent wind and pop
protection for KM miniature micro-
phones, with improved efficiency. Wind
noise attenuation 21 dB. Attenuation at
15 kHz 1 dB. Ø 45 mm, length 70 mm.
Color black.

WNS 110 .............. blk ........ Cat. No. 008535

tional pattern. Only in the upper frequency range is the output lev-
el slightly attenuated. The wind noise attenuation was measured
without electrical filtering in a turbulent air stream traveling at
20 km/h, generated by a noiseless wind machine.

Windscreen WNS 120

Windscreen for the microphone
KM 120 (D) or the capsules AK 20/
KK 120. Wind noise attenuation 15 dB.
Attenuation at 15 kHz 2 dB. Ø 48 mm,
length 65 mm. Color black.

WNS 120 .............. blk ........ Cat. No. 008427

Windscreen WS 100

Larger windscreen for KM miniature mi-
crophones. Wind noise attenuation
23 dB. Attenuation at 15 kHz approx.
4 dB. Ø 90 mm. Color black.

WS 100 ................ blk ........ Cat. No. 006751

Connecting Cables

Microphone Cable LC 4

The LC 4 connects detached capsules
KK 1.. with the KM D output stage.
Ø 3.5 mm, length 5 or 10 m.

LC 4 (5 m) ............ nx ......... Cat. No. 008606
LC 4  (10 m) .......... nx ......... Cat. No. 008607

Other cable lengths are available upon
request!

Summary of Contents for KM D AES 42









Reviews: