SEA 1 | 7
CAUTION
Material damage due to improper use of cables!
If you insert a network cable that is connected to a subwoofer or
an NRC 1, either directly or via an SEA 1, into a network socket,
the network device and the subwoofer can be damaged.
X
Only connect the subwoofer(s) and the SEA 1 to Neumann
remote controls or devices that deliver a RS-232 signal using
a high-quality Neumann RC CAT5 cable (see below). Do not
use a “crossover” type of CAT5 cable.
X
Connect up to three subwoofers as shown:
SUB 3
Remote Control
and RS-232 Inputs
From SRC 1, 2 or
RS-232 Device
SUB 2
SUB 1
EN
