Neumann.Berlin SEA 1 Operating Instructions Manual Download Page 7

6  |  SEA 1

Using the SEA 1

WARNING

Danger of hearing damage due to sudden high sound pres-

sure levels!

Audio signals that are present at switch-on of a subwoofer or 

that can be present during operation, can create sudden, very 

high sound pressure levels which can damage your hearing.

 

X

Always lower the output level of the audio source and set the 
volume control of your remote control to a low level 

before

 

connecting the remote control to the subwoofer, either directly 
or via an SEA 1, or 

before 

starting the audio source (pressing 

“play”).

If – with an audio signal present – you remove the Neumann 
NRC 1 remote control while the switch VOLUME CONTROL of the 
subwoofer is set to „VOLUME CONTROL“ or you set the switch 
VOLUME CONTROL to „DISABLE“ while the Neumann NRC 1

 

remote control is connected, the system output level is immedi-
ately set to 0 dB. This can create sudden, very high sound pres-
sure levels which can damage your hearing. 

 

X

Always lower the output level of the audio source 

before

 

removing a Neumann NRC 1 remote control, either directly 
connected or via an SEA 1, or

 

– with the NRC 1 remote control 

connected – 

before 

setting the switch VOLUME CONTROL of 

the subwoofer to “DISABLE”.

EN

Summary of Contents for SEA 1














Reviews: