KH 80 DSP |
8
Connecting network cables
To use the extended functionality offered by the Neumann .Control iPad
®
App, the loudspeaker
must be connected to a standard network switch using a user supplied standard Ethernet cable
(Cat 5 or better) . The maximum length of the cable is 100 m .
Refer to the Neumann .Control iPad
®
App for information about how to use loudspeakers in a
network .
RJ45
RJ45
RJ45
RJ45
Network Switch
Connecting/disconnecting the KH 80 DSP
to/from
the mains power supply
To connect the KH 80 DSP to the mains power supply:
X
Make sure that the on/off switch
is set to “OFF” .
X
Connect the figure-8 connector of the supplied mains cable to the mains socket .
Power Source
X
Connect the mains plug of the mains cable to a suitable wall socket .
To disconnect the KH 80 DSP from the mains power supply:
X
Set the on/off switch
to “OFF” .
X
Pull the mains plug out of the wall socket .
EN
