KH 80 DSP |
10
Functionality of the Neumann logo
Action
Logo indication
Firmware activities
Loudspeaker is booting up
Solid red
Loudspeaker boot up error
Fast red flashing
Loudspeaker firmware is being updated
Solid rosé
Loudspeaker resetting to factory default settings
Rosé flutter flash
Everyday operation
Operating normally (dimmable via Neumann .
Control)
Solid white
Loudspeaker in active system is solo’ed in
Neumann .Control
Solid white
Loudspeaker system output level is dimmed or
muted (GUI button on Operate page)
Solid rosé
Neumann .Control is saving changes to the
loudspeaker’s memory (not Operate page
commands)
Solid rosé
Protection and Standby
Protection system is activated (takes priority over
other indications)
Red
Neumann.Control Alignment
Setup: Identify the loudspeaker
Rosé pulses (2 Hz) + audible ID
tone
Guided Alignment: Loudspeaker is selected
Rosé pulses (0 .5 Hz)
Manual Alignment: Loudspeaker is selected
Solid rosé
EN
