5. FUNCTIONING / MANIPULATION
a) Installation / assembly
:
- Unpack carefully the device of its packaging.
- Place the warming display on a plane and heatproof surface.
- Then place all the accessories.
- Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
b) First starting
:
During use, you can pour some water in the container to regulate the inside humidity
rate. The autonomy of the container corresponds to a continuous use for one day.
First cleaning
Clean the device and accessories with soapy water or washing liquid before the first
use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the
values indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged.
- Unwind completely the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Function
Switch (n°2 on picture)
On/Off
Electronic thermostat (n°1 on
picture)
Temperature setting
Switch (n°3 on picture)
On/off ventilation
