12
Installation instructions
Slide
plinth
firmly into the
spaces on either side of
the chasis to attach.
Fix brackets to panel using Ø3.5 x
13mm screws. Insert
plinth
into product
and mark the desired alignment depth
on the bracket. Remove panel. Using a
screwdriver, bend the marked tabs out
on both brackets to prevent
plinth
from
receding into product further.
153
65
30
100
A
plinth
depth range
4
1
Mark out the pilot hole locations for
each bracket. To establish the height in
which the bracket will be fixed, measure
the distance from the floor to the lowest
hole of the bracket. Remove bracket
from the product and plot the location of
the other holes relative to this
measurement. Note door overhang and
swing range.
2
Plinth
installation
A
180.9 Centre
3
6
Separate panel
