11
Installation instructions
IMPORTANT!
5
4
Door balancing:
The door balance can be
adjusted via two screws
accessed through
two holes at the front.
Adjust both sides at the
same time, alternating
between the sides so
that even balance is
achieved.
Adjust these using the
SUPPLIED HEX KEY
ONLY until the door just
remains open under its
own weight.
Open the door and remove
screws before replacing
them with Ø3.5 x 44mm
screws to fix panel into
place.
3
Adjust the placement of
the door to the correct
position.
12 mm
2 mm
[08] X4
(3.5x44
m m)
