background image

Problem

Possible cause and solution

Poor drying results.

Tableware has been left for too long inside a closed appliance.

There is no rinse aid or the dosage of rinse aid is not enough. Set the
rinse aid dispenser to a higher level.

Plastic items may need to be towel dried.

We recommend to always use rinse aid, even in combination with multi-
tablets.

There are whitish streaks or bluish lay-
ers on glasses and dishes.

The release quantity of rinse aid is too much. Adjust the rinse aid level
to a lower level.

The quantity of detergent is too much.

There are stains and dry water drops
on glasses and dishes.

The released quantity of rinse aid is not sufficient. Adjust the rinse aid
level to a higher level.

The quality of the rinse aid can be the cause.

The dishes are wet.

The programme does not have a drying phase or has a drying phase
with low temperature.

The rinse aid dispenser is empty.

The quality of the rinse aid can be the cause.

The quality of the multi-tablets can be the cause. Try a different brand
or activate the rinse aid dispenser and use rinse aid and multi-tablets
together.

The interior of the appliance is wet.

This is not a defect of the appliance. it is caused by the humidity in the
air that condenses on the walls.

Unusual foam during washing.

Use the detergent for dishwashers only.

There is a leak in the rinse aid dispenser. Contact an Authorised Serv-
ice Centre.

Traces of rust on cutlery.

There is too much salt in the water used for washing. Refer to "The
water softener"
.

Silver and stainless steel cutlery were placed together. Avoid to put sil-
ver and stainless steel items close together.

There are residues of detergent in the
dispenser at the end of the pro-
gramme.

The detergent tablet got stuck in the dispenser and therefore was not
completely washed away by water.

Water cannot wash away the detergent from the dispenser. Make sure
that the spray arm is not blocked or clogged.

Make sure that items in the baskets do not impede the lid of the deter-
gent dispenser from opening.

Odours inside the appliance.

Refer to "Internal cleaning".

Limescale deposits on the tableware,
on the tub and on the inside of the
door.

Refer to "The water softener".

Dull, discoloured or chipped tableware.

Make sure that only dishwasher-safe items are washed in the appli-
ance.

Load and unload the basket carefully. Refer to basket loading leaflet.

Place delicate items in the upper basket.

14

Summary of Contents for IDSH603W

















Reviews: