13
NTVCAM51 User Guide 1-0
www.networktv.tv
3. Application Instruction
3.1 Video Output
3.1.1 Power-On Initial Configuration
Connecting the power, camera will have initial configuration, R indicator light will be flashing. When the camera returns to the HOME
position (middle position for P/T), and lens finishes zoom in/out, the auto-testing is finished. IR led will also stop flashing. If the
preset 0 is set, camera will rotate to the 0 preset position after initial configuration.
3.1.2 Video Output
Connect the video output cable: the user selects the output mode according to the machine model.
Figure 1.4.1 is for your reference (output interface introduction for each product)
1)
network output: connect this product and your computer through a network cable, then open a browser, enter the camera IP
address (factory default 192.168.5.163) in the address bar, then at the login page, input user name and password (factory
default are “admin”). Finally enter the preview page and you will get the camera view.
(Note: If you forget your user name, password, IP address, you can manually restore the default by the remote controller key
combination * #)
2) 3G-SDI output or DVI (HDMI) output: Connect the monitor with the corresponding video output interface, then the monitor
output image.