manualshive.com logo in svg

Network Technologies XTENDEX ST-C6USBH-300, Operating Manual

Share
Download
Network Technologies XTENDEX ST-C6USBH-300 Operating Manual Download Page 9

NTI XTENDEX 300 Foot HDMI and IR Extender 

 

6

 
 

Installing The Local Unit   

 

1.

 

Connect an HDMI-3-MM (supplied) or 

DVI-HDMI-xx-MM

 cable (page 2) between the CPU and the "HDMI In" connector on the 

Local Unit.  

2.

 

Connect a USB2-AB-1M-5T USB cable (supplied) between a USB port on the CPU and the “USB CPU” connector on the Local 

Unit.  

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 

                           

                            

 

 

 

                                                    Figure 2- Connect the XTENDEX Local Unit to the source 

 

     

Connect the CATx Cables 

Connect the CATx cable between the “CATx” ports on the Local 
and Remote Unit.  (See Figure 3)  When properly inserted the 
cable ends should snap into place.    

 

                 

 

 

 
  

                 

WARNING:  Never connect the XTENDEX to an 

Ethernet card, Ethernet router, hub or switch or other 
Ethernet RJ45 connector of an Ethernet device.

   

Damage to 

devices connected to the Ethernet may result.  

 

 

                                                                                                                  Figure 3- Connect CATx cable 

 
 

!

Summary of Contents for XTENDEX ST-C6USBH-300
















Reviews:

No comments

Brands by name

Popular brands

Load more brands