NTI 4K HDMI EXTENDER OVER HDBASE-T
4
5. Connect the Receiver to the extended display device with either a HDMI to HDMI cable, or HDMI to DVI cable (required if you
have a DVI video source).
Note: If your display device is DVI only, the video source must also be DVI.
6. If USB devices are being extended, connect a USB cable with USB Male Type B Mini to the Receiver and USB Type B male
connector to the USB Device.
7. If an RS232 device is being extended, connect a 3-wire RS232 cable between the DB9 connection on the RS232 device and
the 3-wire connector on the Receiver. See RS232 Cable Pinout on next page.
Power ON
Connect the 5V 2A AC Adapters to the Transmitter and Receiver. Three LEDs will provide status information.
Blue LED (below power jack) - Illuminates when power is applied
Green LED (on RJ45- Illuminates when connection is made between Transmitter and Receiver
Yellow LED (on RJ45) - Illuminates when Transmitter and Receiver are transferring data
