Chapter 3: Replacing Disk Shelf Devices
33
2
Slide the power supply into the disk shelf until you hear the power
supply connect with the connector inside the disk shelf chassis.
Caution
Do not use excessive force when sliding the power supply into the
disk shelf; you can damage the connector.
3
Press the cam mechanism levers toward each other to engage the
power supply into place.
4
If the disk shelf has...
Then...
An AC power supply
1.
Plug the power cord into the power
receptacle and fasten it with the
clamp.
2.
Plug the other end of the power cord
into a grounded AC power source.
A DC power supply
1.
Connect the positive, negative, and
ground wires to the power supply.
2.
Plug the other end of each power
cord into a power source.
5
Turn on the power switch.
Step
Action