23
status bar will display this icon when the speaker is on.
2. Mute: To mute your side of the conversation, select ‘Mute’ so it
shows a green bar. To turn it o
ff
, select it again so the bar is
un
fi
lled. The status bar will display this icon when Mute is on.
3. Hold: To put an active call on hold, select ‘Hold’ so it shows a
green bar. To resume the call, or take the call o
ff
hold, select it
again so the bar is un
fi
lled. If you take a call while already on a
call, the
fi
rst call will be placed on hold automatically. The status
bar will display this icon when a call is on hold.
4. Add call: If you need to enter numbers while on a call, touch
‘Add call’.
5. Incoming call: During call in progress, if you are on a call (“call
in progress”) when another call comes in (“incoming call”), you
have a few choices:
t "OTXFS UIF JODPNJOH DBMM BOE QMBDF UIF DBMM JO QSPHSFTT PO
hold. To switch calls at any time, touch ‘Swap calls’.
t*GZPVEPOUXBOUUPJOUFSSVQUZPVSDBMMJOQSPHSFTTUIFOUPVDI
‘END’.
t*GZPVIBWFPOFDBMMJOQSPHSFTTBOEPOFDBMMFSPOIPMEUPFOE
both calls, touch ‘End all’.
6. While on a call, you can conference up to six callers, counting
yourself. Note that you can also have an additional caller on hold
during a conference call, regardless of how many participants
are on the conference.
Note: Whether the group call function can be used depends on
whether the network operator supports and provides such
function as well as whether you have applied for such function.
Please contact network operator for details.
C
M
Y
CM
MY
CY
CMY
K
NTW-45qHD-Manual-ENGLISH-HIGH.pdf 23 10/04/2015 15:06:18
