NetVu FireVu Standalone Installation Manual Download Page 60

Page: 60 / 97

Page 60 of 97

Title FireVu Detector Standalone Installation Manual

NetVu Ltd.

www.netvu.org.uk

No 1 Thellow Heath Park, Northwich Road, Northwich, Cheshire. CW9 6JB

Video Storage Web-page

This Web-

page enables configuration of the unit’s on-board (μSD card) video storage.

Device

– The device corresponds to one of the following types:

mddX -

(e.g. mdd0) Internal storage, μSD card

mdd1X -

(e.g. mdd10) External μSD card

uddX - (e.g. udd0) External USB device, from udd0 to udd3.

Allocate

–

This will allocate this drive to have a video storage capability. When a device is

allocated the system will begin building video partitions. Progress is shown on screen.

Format

–

When formatting the uni

t’s application drive only, the video folder will be removed.

Formatting any other device will remove all the data. In both cases, recording on the system is
halted when formatting and, if already allocated, the formatted device will be deallocated as a
video storage device.

Alarm Web-pages

Listed below are descriptions of the Web-

pages to be found by navigating to the “Alarm“ Web

page.

Summary of Contents for FireVu Standalone


































































































Search results

Summary of Contents for FireVu Standalone

Reviews:

Related manuals for FireVu Standalone

Brands by name

Popular brands

NetVu FireVu Standalone, Installation Manual

Search results

Summary of Contents for FireVu Standalone

Reviews:

Related manuals for FireVu Standalone

Brands by name

Popular brands