background image

9

7.4 Detection coverage

Horizontal projected area

Space projected area

IR coverage range:

The coverage area A- Distance: 11 meters; sensing angle: 30°.
The coverage area B- Distance: 8 meters; sensing angle: 60°.
The coverage area C- Distance: 5 meters; sensing angle: 120°.

8. Important Maintenance Instruction

Your device is a product of superior design and craftsmanship and should be used with care. The
following suggestions will help you use the warranty service effectively.

Keep the equipment dry. Rain, moisture, and various liquids or moisture may contain minerals
that can corrode electronic circuits. In case the device is wet, please dry it completely.

Do not use or store in dusty or dirty areas. This can damage its detachable parts and electronic
components.

Do not store in excessive heat. High temperatures can shorten the life of electronic devices,
destroy batteries, and deform or melt some plastic parts.

Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature,moisture will form inside, which will destroy the
board.

Do not throw, knock or shake the device. Rough handling of equipment can destroy internal
circuit boards and delicate structures.

Do not wash with strong chemicals, detergents or strong detergents.

Do not apply with paint. Smudges can block debris in detachable parts and affect normal
operation.

Do not throw the battery into a fire to prevent the battery from exploding. Damaged batteries
may also explode.

All of the above suggestions apply equally to your device, battery and accessories.
If any device is not working properly.
Please take it to the nearest authorized service facility for repair.

Summary of Contents for RB11E












Reviews: