4
4. Set up Instruction
On/Off
Power on
Insert batteries. (Users may need a screwdriver to open the cove0.r)
Turn on
Press any function key till the green indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds, and the green indicator flashes 20 times.
Power off
Remove Batteries.
Note:
1. After remove and insert the battery, the device memorizes previous on/off state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
3. Do not power on the device while any function key is pressed, otherwise the device will enter
the engineering test mode.
Network Joining
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
Suggest to check the device verification information on the gateway or consult your platform
server provider.
Function Key
Press and hold for 5 seconds
Restore to factory setting / Turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
Sleeping Mode
The device is on and in the
network
Sleeping period: Min Interval.
When the reportchange exceeds setting value or the state changes, a data report will be sent
according to Min Interval.
Low Voltage Warning
Low Voltage
2.4V
