8
2)
The collected data is compared with the last reported data. If the variation of the data is greater than the ReportableChange value,
the device will report according to MinTime interval. If the data variation is not greater than the last reported data, the device
will report according to MaxTime interval.
3)
We do not recommend setting the MinTime Interval value too low. If the MinTime Interval is too low, the device will wake up
frequently and the battery will be drained soon.
4)
When the device sends a report, regardless of the resulting from data variation, button pushed or MaxTime interval, another
cycle of MinTime/MaxTime calculation will start.
6. Installation
This product comes with waterproof function. When using it, the back of it can be adsorbed on the iron surface, or the two ends can be
fixed to the wall with screws.
R718WBA has built-in magnet (as the figure on the left below). When installed, the device can attach to the surface of the ferrous object
easily. In order to installing the device firmly, users can secure it to the wall or other surface by using screws (need to purchase by
oneself) (as the figure on the right below).
Note:
Do not install the device in a metal shielded box or other electrical equipment around it to avoid affecting the wireless
transmission of the device.
Fixed screws
Water leakage
detection line
Temperature
and humidity
detection
