7
6. Installation
2. The device periodically reports the data
according to Max Time. The default Max
Time is 3min.
Note: Max Time can be modified by the
downlink command, but it is not
recommended to set this time too small to
avoid excessive battery drain.
1. R718PA7 has a built-in magnet (as the figure
below). It can be attached to the surface of an iron
object conveniently and quickly when it is installed.
In order to make the device installation more secure,
use screws (purchased) to fix the device to the wall or
other surface (such as the installation diagram). The
device is screwed by two screws in the middle
(purchased by users).
Note: Do not install the device in a metal shielded box
or in an environment with other electrical equipment
around it to avoid affecting the wireless transmission
of the device.
3. The device can be used in scenarios such
as:
Smart city
Construction site
School
Residential area
