6
4.4 Data Report
The device will immediately send a version packet report along with an uplink packet including
0-24V ADC, Dry Contact and 4-20mA
values.
The device sends data in the default configuration before any configuration is done.
Default value:
Maximum time
: 900s (15min)
Minimum time
: 900s (15min)
Reportchange:
BatteryChange ---- 0x01 (0.1V)
ADCRawValue Change ---- 0x64(100 mV) *Must more than 0x50 (80 mV)
CurrentChange ---- 0x02 (2 mA)
Note:
The device send data cycle depends on real burning configuration.
The interval between two reports must be the minimum interval.
Data report configuration and sending period are as following:
Min. Interval
(Unit:second)
Max. Interval
(Unit:second)
Reportable Change
Current Change
≥
Reportable Change
Current Change
＜
Reportable Change
Any number between
1~65535
Any number between
1~65535
Can not be 0.
Report
per Min. Interval
Report
per Max. Interval
