4
4.
Set up Instruction
On/Off
Power on
Insert two sections of 3V CR2450 button batteries and close the battery
cover
Turn on
Press any function key and the green and red indicator flash once.
Turn off (Restore to factory setting)
Press and hold the function key for 5 seconds and the green indicator
flashes 20 times.
Power off
Remove Batteries.
Note:
1.
Remove and insert the battery; the device memorizes previous on/off
state by default.
2.
On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage
components.
3.
Press any function key and insert batteries at the same time; it will
enter engineer testing mode.
Network Joining
Never joined the network
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
Suggest to check the device verification information on the gateway or
consult your platform server provider.
Function Key
Press and hold for 5 seconds
Restore to factory setting / Turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: the green indicator flashes once and sends a
report
The device is not in the network: the green indicator remains off
