background image

 

 

1.

 

Introduction 

R313CB is a switch detection device which is the Class A device of Netvox based on LoRaWAN

TM

 protocol.   

It is compatible with the LoRaWAN protocol. When the doors and windows are abnormally opened or the glass of the doors and 

windows are broken, R313CB will send a message to the gateway. 

  It can be installed on the door or window with two glass sliding sashes. The reed switch and the magnet of the main body are 

respectively installed on both sides of the window sashes. The external reed switch and the magnet can be installed on both sides 

of another window sashes, and the glass sensor can be pasted on the glass. 

 

When the window or door is opened, R313CB will send an alarm message to the gateway. When the door or window is closed, it 

will send a message that the state is normal. When the glass is broken, R313CB will send an alarm message to the gateway, and then 

the data which is sent after breakage is based on the current state. If it is open, the data is an alarm state. If it is closed, the data is a 

normal state.   

 

LoRa Wireless Technology: 

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other 

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. 

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation 

equipment, wireless security systems and industrial monitoring. Main features include small size, low power consumption, 

transmission distance, anti-interference ability and so on. 

 

LoRaWAN: 

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and 

gateways from different manufacturers. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for R313CB













Reviews: