5
5.
Data Report
The device will immediately send a version packet when joined the network
The device sends heartbeat according to default report interval.
6.
Control
6-1 Device Learning Command
Sending learning commands from gateway to turn on learning mode.
After device’s BLUE LED is on, press remote controller’s button and point it to device to learn
IR command.
BLUE LED is off after learning completed and sends the message back to gateway.
Note:
IR saving storage is full if return status is ‘02’, and needs to erase IR command to continue
learning.
6-2 IR Command Execution
IR execution method 1.
This method needs to have complete IR codes
（
IR data
）
response when learning.
IR execution method 2.
This method uses Actual IRIndex response command to edit IR command execution and do not need
to have complete IR codes
（
IRdata
）
.