4
3.
Main Features
Compatible with LoRaWAN Class C
DC 12V power supply
Infrared frequency 38KHz
Infrared learning and emission
Simple operation and setting
4. Set up Instruction
On/Off
Power on
Plug in DC 12V Adapter
Turn ON
Blue and Red LED flash at the same time after power-on means turn on
successfully
Power off
Remove Adapter.
Note:
1. On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage
components.
2. Press function key and plug in adapter at the same time; it will enter
engineer testing mode.
Network Joining
Never joined the network
Power on the device to search the network
RED Indicator stays on: success
RED Indicator remains off: fail
Had joined the network
(Never reset to default)
Power on the device to search the previous network.
RED Indicator stays on: success
RED Indicator remains off: fail
Fail to join the network
(When the device is on)
First two minutes: Wake up every 15 seconds to send join-request.
After two minutes: enter sleeping mode and wake up every 15 minutes
to send join-request.
Note:
Suggest checking device verification on gateway or consult with your
NS provider if failed.
Button Function
Press and hold the
function key for 5 seconds
Function : Reset to factory default
RED Indicator flashes for 20 times.
Reset to factory default is failed if RED LED does not flash.
Press function key once
Joined the network: Sends an uplink version packet.
Not joined the network: No response