-
30 -
Transmit Code 93 Check Digit (Enable)
*Do Not Transmit Code 93 Check Digit
Code 11
Enable/Disable Code 11
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11
*Disable Code 11
Set Lengths for Code 11
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within
a specific range
One Discrete Length
Select this option to decode only Code 11 symbols containing a selected length. Select the length using the
Numeric Bar Codes
in appendix. For example, to decode only Code 11 symbols with 14 characters, scan
Code
11 - One Discrete Length
, then scan
1
followed by
4
. To correct an error or to change the selection, scan
Cancel
in appendix
.
Code 11 - One Discrete Length
Summary of Contents for NT-1228BL
Page 62: ...58 4 5 6 7 8 9...
