7
Configuring the scanner
(continued)
Resume broken upload
Scan this code to resume
uploading data from the
breakpoint.
You can scan this code to resume
uploading from the breakpoint
when uploading is broken down
(when the base is disconnected
or powered off).
e.g.: if uploading is broken down
at the 6th code of total 10 stored
codes. Scan this code, the
uploading will continue from the
6th code to the last.
During uploading, the beeper
indicates the same as under
normal
mode.
(please,
see
normal mode)
Show total number of
scans
Scan this code to show
total number of stored
scans.
This counts by the number of
carriage return.
Show number of last scans
Scan this code to show
number of last stored
scans.
Note: this counter shows
new scan number after
“uploading data of last
operation”.
C
lea
r stor
age
(use
with ca
uti
on)
Scan this code to clear
scanner storage.
(To scan this code, please
turn the scanner by 90°)
On a successful clearing, the
blue light flashes once
.
(Available under both normal
mode and storage mode)
