35
Model:
Netti Vision
Language:
English
Version:
2021-06
My-Netti.com
DISINFECTION OF THE WHEELCHAIR
Remove cushions.
See separate washing instruction above:
Wipe disinfection: use a soft rag wetted with
Hydrogen peroxide or technical alcohol
(isopropanol) and wipe the whole chair clean.
Hydrogen peroxide recommended:
NU-CIDEX “Johnsen and Johnsen”.
Check / re-adjust screws and nuts at regular
intervals.
Sand and sea water (salt used for gritting in
the winter) can damage the bearings of the
front castors and main wheels.
Clean the wheelchair thoroughly after use.
* As a rule of thumb, use oil on movable parts
and all bearings. Alu Rehab recommends use
of ordinary bicycle oil.
9.3
SPARE PARTS
The Netti chairs are built of modules. Alu Rehab
carries stock of all parts and is ready to supply these
on short notice. Necessary instructions for mounting
will follow the parts.
Parts to be handled by user are defined in spare part
catalogues that can be downloaded at
www.My-Netti.com
.
These parts can, if needed, also be removed and sent
to manufacturer / distributor upon request.
Parts related to wheelchair frame
construction must be handled by
manufacturer or authorized service
facility.
If defects or damages occur,
please contact your dealer.
Original paint for repair of scratched,
can be ordered from Alu Rehab.
9.4
LONG TERM STORAGE
If the wheelchair is stored for longer time –
(longer than 4 months) no particular actions
are needed. We recommend that the chair is
cleaned before it is stored. Before starting using
it again, the maintenance instructions must be
followed.
We recommend to replace the head support if the
chair is given to a new user.
