11
Model:
Netti DYNAMIC leg support
Language:
English
Version:
2021-03
My-Netti.com
4.2
FOOTBOARD HEIGHT
ADJUSTMENT
•
Loosen the M6 screws holding the leg
support length-profile on the outside with
5 mm Allen-key.
•
Adjust the footboard to a height from
top of front edge seat cushion to the
footboard equal to the lower leg length – F
dimension.
Make sure there is enough free space
under the footboard for the
wheelchair to pass minor obstacles.
Slightly tilting the seating unit may
help.
If not sufficient, the chair height must
be adjusted as described in the main user
manual for the wheelchair model.
5. CALF SUPPORTS
ADJUSTMENT
With both leg supports in correct height, the calf
supports must be adjusted:
5.1
CALF SUPPORT HEIGHT
ADJUSTMENT
•
Loosen the two M6 screws with 5 mm Allen-key
– on the half-moon brackets – holding the
calf pad arm. This allows the calf support-
pad arm to move up and down.
The calf supports should in addition to
supporting the calf also help prevent
the feet sliding backwards from the
footboard.
•
Choose a height covering the middle and
lower part of the user’s calf and tighten the
screws.
•
Twist the calf pads to an angle giving
support for the leg when the foot
support is angled. The calf pads can
swing freely to follow the movements
and adjust to the user’s leg position.
