2
1
General information
The pneumatic linear vibrators of the series NTS are hereafter referred to
as "NTS".
Please refer to the delivery note for the scope of delivery.
Check the packaging for possible transport damage. In the event of dam-
age to the packaging, check the contents for completeness and possible
damage. Inform the carrier in the case of damage.
The target group for these instructions is technical staff, who have basic
knowledge in pneumatics and mechanics.
Only complying technical staff may work on the NTS.
The NTS may only be installed, put into operation, maintained, troubleshot
and disassembled by persons authorised by the operator.
All technical information, data and instructions for installation, operation
and maintenance in these instructions are based on the latest information
available at the time of printing and take our past experience to the best of
our knowledge into account.
No claims can be derived from the information, illustrations and descrip-
tions in these operating instructions.
The manufacturer does not assume liability for damages resulting from:
•
failure to observe the instructions,
•
improper use,
•
unauthorised repairs,
•
technical modifications,
•
use of non-permissible spare parts.
Translations are made to the best of our knowledge.
Netter
Vibration
does not assume liability for translation errors, even if the
translation was made by us or on our behalf. Only the original German text
remains binding.
Explanation of additions to names in model designations:
•
NTS L: models for oil-free operation
•
NTS HT: models for high ambient temperatures
•
NTS NT: models for low ambient temperatures
•
NTS HF: high frequency models
•
NTS NF: low frequency models
The pneumatic linear vibrators of the series NTS comply with the EC Ma-
chinery Directive 2006/42/EC.
In particular, the standard EN ISO 12100 has been observed.
Designation
Scope of
delivery
Target group
Limitation of
liability
Model
designations
Directives /
standards
observed