Operating the Product
Before First Use
If you are using the kettle for the first time, it is recommended
that you clean your kettle by boiling a full kettle of water twice
and then discarding the water.
The maximum capacity for this kettle is 1.7L.
Using The Kettle
•
To fill the kettle, remove it from the power base and open the
lid by pressing the lid release button. Fill the kettle with your
desired amount of water and then close the lid. Alternatively,
you may fill the kettle through the spout. The water level
should not exceed the MAX mark or sit below the MIN level.
Too little water will result in the kettle switching off before the
water has boiled.
•
Put the kettle on the power base and connect the plug into a
power outlet.
•
This kettle uses an IC programme to control the heat up or
keep-warm functions. When the kettle is put onto the power
base, all four light indicators on the control panel turn on and
one beep can be heard. At the same time, the indicator lights
in the kettle will light up in a red, green, and blue sequence,
then they will turn off.
•
The indicator lights in the kettle will illuminate in different
colours under different water temperatures. 50°C (green),
70°C (blue), 80°C (purple), 90°C (light green) and 100°C
(red).
